You can also use Exposure for a short time at nighttime

As you see the night view of the city's main thoroughfare, with light stripes from the crossing, you can Expected to use Exposure for a long time, but not all the time, using a new version can provide better images. Yes.

For such striking light stripes you need a dark background with nighttime pictures, but during night or dark. Strong, there may be less traffic that takes a long time, or picks up a bigger road with more traffic, but you can Use the spark instead of using an image with long exposure exposure Available images Short-Term Exposure then combined.

You can use short exposure Exposure for 10 to 30 seconds, and it is easier than using Exposure for 15 minutes for some reason such as :

• Easily find the total brightness of the view. You can take Exposure time of 30 seconds and can quickly adjust Aperture when needed. For 15 minutes of exposure, the exposure is a little trickier.
• Depending on the traffic situation, you may be able to take pictures of each vehicle and use only those that fit well. You can remove a vehicle that changed the route during a record that can create a dashed line.
• When the car can not be separated, you can have the option to delete any part of the image you do not want .

Shooting is pretty good

The general formula for photography uses a long exposure exposure, you should put the camera on a good tripod to fit the camera's weight and record it. Without shaking, you can use the Remote trigger. If you use a DSLR camera, you can enable the Mirror lock-up function to reduce the vibration. Then you can start recording the car and use a suitable Exposure Time.

You can maintain the same exposure time at different times or differently, but you should pay for Exposure changed by Adjust Aperture to keep all the footage at the same level. Exposure Period Depending on the overall view, you should use long exposure times to capture the full view of the movement. A car and use a short Exposure Time to take a picture of the car then. Of course, if the car does not come up one at a time, there may be some problems, so you need to coordinate the cutting-edge program . You can use Adobe Photoshop or Zoner Photo Studio or other programs, but here we will show you with Zoner Photo Studio.

Cutting

If you have multiple images, you can select some of them, and delete or leave the rest of the image.

You can add an image above the image by clicking the Add Layer button in the Layers section of the right panel, and set Layer-blending Mode To Lighten, which compares the layer with something under it, and shows only the brightest pixels. Thus, the result will be enhanced by the striped light in the mixing image, maintaining a good quality.

Use only part of the image

If the image has a strip light or other features that do not appear to be good, you can insert the image of the layer as shown above Select the unwanted point on the image and delete it with the Selection Brush (Shift + Q) and press the Delete key. You can set the value in the Selection Brush as needed. You will get a better picture.

Improved performance

After the picture is blended, you can get some road-view traffic. You can use the Healing Brush (J) and Clone Stamp (S) to remove any annoying items, such as a street or dashboard on the road. The view is made with a yellow tint.